Ucrete® MF Product Page

Ucrete® MF

Ucrete® MF is a three-component, polyurethane-cementitious, floor system designed for application to concrete and various other substrates to protect them against chemicals, abrasion, impact and thermal shock. This horizontal flowable, monolithic, flooring system will tolerate a wide range of organic and inorganic acids, alkalis and salts. Ucrete® MF floors are extremely strong and in most cases, have physical properties which are approximately double that of concrete. Ucrete® MF is a semi-matte smooth surface, flowable, form of Ucrete that will yield excellent results when applied at a depth of 1/4th (6mm) of an inch or greater. Primarily designed for dry processes.

Advantages

Excellent impact and abrasion resistance

Extremely high bond strength

Wide temperature service range from -50°F to 200°F (-45°C to 93°C)

Coefficient of thermal expansion similar to that of concrete

Can be laid on 7 to 10 day old concrete

No priming or sealing of the substrate is required in most cases

Resistant to intermittent live steam use or continuous hot water cleaning

Fast curing resulting in minimal down time

Solvent free and low odor

Interior or exterior use

Proven track record - 25 years of project references

Unaffected by freeze/thaw cycles

Application

Ucrete® MF is ideal for interior, and some exterior applications, when severe conditions such as impact pressure, thermal shock and chemical exposure are expected. Ucrete® MF is excellent for use in the dry processing areas of meat, poultry and dairy plants, bakeries, confectionery packaging, food warehouses, television studios, textile production, precious metal refineries, pharmaceutical facilities, freezers and refrigerated storage. Ucrete® MF is applicable to areas subject to heavy foot traffic and heavy wheeled vehicles such as fork-lift trucks. While the most common substrate is concrete, this flooring system may also be applied over other substrates.

Chemical Resistance

The Ucrete® HF Flooring System will resist spillage of and exposure to for up to seven (7) days at 72°F as per ASTM

D-1308 the following chemicals.

Dilute mineral acids including Hydrochloric(<35%) , Phosphoric(<50%) and Sulphuric(<30%)

Alkalis, including potassium hydroxide to 50% concentration.

Some dilute organic acids such as acetic (30%) formic, citric acid and urine

Fats, oils and sugars

Mineral oils, diesel fuel, kerosene and gasoline

Most Organic solvents, including aliphatic and aromatic hydrocarbons and alcohol

Note: Full chemical resistance is achieved after curing for seven (7) days. For chemical resistance to a specific compound consult the Chemical Test Data Sheets specific to this flooring system.

Performance Design

Ucrete® MF is and independent system designed primarily to be a one application step product. Variation in the thickness will affect the thermal and impact resistance of the product. Thickness of 1/16h (1.5mm) of an inch to 1/4 (6 mm) of and inch are recommended, with the thicker system providing the highest level of thermal and impact resistance. Also available is Ucrete® WR designed to aid in building vertical surfaces such as cove bases.

Ucrete® HF

Ucrete® HP/Q

Ucrete® MF

Ucrete® WR