Sherwin Williams

ARMORSEAL® 300 NON-SKID EPOXY

ArmorSeal 300 Non-Skid Epoxy is a catalyzed epoxy, non-skid coating that exhibits superior chemical resistance to acids, alkalies, solvents, fuels, etc. It is available in one grit size and four colors and is recommended for environments where a tough, chemically resistant, heavy duty non-skid coating is required.

• Impact Resistant
• Abrasion Resistant
• Chemical Resistant
• Suitable for use in USDA inspected facilities

Data Sheet                                                      MSDS

ARMORSEAL® 5020 EPOXY RESURFACER

ArmorSeal 5020 Epoxy Floor Resurfacer is a trowelable epoxy surfacing and leveling compound for new and old floors of concrete, wood, or steel where a high degree of chemical and abrasion resistance is required. The physical properties of ArmorSeal 5020 are much higher than those of concrete and its excellent abrasion and impact resistance recommend it for high traffic areas.

• Suitable for use in USDA inspected facilities

Data Sheet                                                      MSDS

ARMORSEAL® 650HB/RC SELF-LEVELING EPOXY

ArmorSeal 650HB/RC 100% Solids Self-Leveling Epoxy is a 3 component, high performance floor system that provides a high gloss, seamless, hygienic surface that is a extremely hard wearing and durable. ArmorSeal 650HB/RC should be used for applications requiring film builds greater than 30.0 mils dft.

• Suitable for use in USDA inspected facilities
• Chemical Resistant
• Impact Resistant
• Abrasion Resistant

Data Sheet                                                      MSDS

ARMORSEAL® 650SL/RC SELF-LEVELING EPOXY

ArmorSeal 650SL/RC Self-Leveling/Recoatable Epoxy is a 2 component, high performance floor system that provides a high gloss, seamless, hygienic surface that is extremely hard wearing and durable. The coating can also be applied to provide a nonskid texture. This product may be top coated if required

• Suitable for use in USDA inspected facilities
• Chemical Resistant
• Impact Resistant
• Abrasion Resistant

  Data Sheet                                                      MSDS

ARMORSEAL® 700HS WB EPOXY

ArmorSeal 700HS High Solids Water Based Epoxy Floor Coating is a 2 component, low VOC, epoxy floor finish/coating designed to provide an attractive, uniform appearance in industrial environments. Formulated for use in medium to heavy traffic conditions. Exceptional chemical resistance, abrasion resistance, and excellent gloss retention.

• Suitable for use in USDA inspected facilities

  Data Sheet                                                      MSDS